Lian Li Galahad Series High Performance All in One CPU Liquid Cooler - 240mm, With Addressable RGB Lighting, Rotatable Block Housing and High Airflow Fans Features REMOVABLE MAGNETIC ALUMINIUM CAP Switching between two different looks to match the interior configuration. CUSTOMIZABLE ADDRESSABLE RGB LIGHTING The 47 addressable RGB LEDs embedded in the GALAHAD 360 (35 LEDs in the GALAHAD 240) ensures brighter and complex lighting effects. The GALAHAD AIO is compatible with most mainstream motherboard softwares, allowing users to create a synchronized system with ease. Through the included controller, switching between 17 lighting effects is a breeze.

Features: Mid-tower chassis configurable for air cooling and water cooling Airflow optimized front, top and PSU shroud side mesh panels Equipped with 2 x front 160 PWM fans (ARGB or non-RGB) and 1 x rear 140mm PWM fan Supports 360 radiator at the top, front and a maximum of 10 fans Includes rear PCIe fan bracket Front I/O that can be relocated to the bottom Extensive cable management solution AIRFLOW FOCUS The LANCOOL 216 is a mainstream case that features all-around mesh panels for optimal airflow. Thanks to its modular rear panel, it can be optimized for air cooling or water cooling. It includes 2 x 160mm and 1 x 140mm pre-installed PWM fans and an innovative rear PCIe fan bracket to maximize airflow. CONTINUOUS FRONT TO TOP MESH To ensure adequate airflow is provided to the system, the LANCOOL 216 features mesh at the front, top, and on the PSU shroud’s side. The front mesh extends to the top for a continuous mesh panel. LANCOOL 216 RGB FANS The included 160mm ARGB fans feature two channels of LEDs (one on the outer rim of the fan, another at the shaft of the fan blades) that can be controlled separately via an optional accessory, or via the motherboard lighting software by connecting them directly to a motherboard 5V 3pin header. Located in the second chamber behind the motherboard, a SATA-powered fan hub can support up to 4x ARGB and PWM fans. AIR COOLING MODE / WATER COOLING MODE The modular motherboard I/O allow users to move the motherboard to a higher position which is more favorable for air-cooled systems, or a lower position for water-cooled systems. WATER COOLING Set lower, the motherboard leaves a 63mm thick gap at the top to install radiator/fan combos, ideal for AIOs or custom water cooling. FRONT I/O CAN BE RELOCATED Including a power button, reset button, audio port, 2x USB3.0 ports, and a USB Type C port, the front I/O module can be relocated to the lower left side of the front panel. HARDWARE COMPATIBILITY The LANCOOL 216 supports ATX, Micro-ATX, MINI-ITX motherboards, and E-ATX under 280mm in width (when the grommet bar is flipped 180°). In addition, thanks to its symmetrical design, cable management in the 2nd chamber remains unaffected. LATEST GEN. GPU READY With enough room for graphics cards up to 392mm in length, and 180mm in height (for air cooling mode), the LANCOOL 216 is compatible with even the largest NVIDIA 4000 series cards. PRESSURE LEAK FREE Pre-installed at the front of the top radiator bracket, a seal plate ensures no pressure leak is created when installing smaller than a 360 radiator/3x120mm fans at the top. REMOVEABLE TOP RADIATOR BRACKET The top mounting bracket can be completely removed from the case for easier hardware installation. The bracket comes off with the left side frame bar to provide optimal clearance. PCIE FAN BRACKET The GPU placed at the top of the expansion slots in air cooling mode opens up the possibility to add a 120mm fan at the rear of the case without obstructing the GPU I/O. This is also possible with a vertically mounted GPU in both air-cooled and water-cooled mode. The additional 120mm fan provides better cooling for the GPU and a greater intake/exhaust balance for the system. VERTICAL GPU COMPATIBLE The PCIe expansion slot panel can be rotated to vertically install the GPUs, only an additional riser cable is required. CABLE MANAGEMENT The LANCOOL 216 offers multiple options for easy cable management. Along the cable grommet bar, 3 large velcro straps can hold 2 different sets of cables. 3 small clips are located along the rear side panel, ideal for cleanly routing the CPU 8pin cable, and 2 additional velcro straps are located near the PSU chamber to help hold down the extra PSU cable length away from the ventilation path in the bottom chamber. DUST FILTER For users who take dust management to the next level, a magnetic front panel dust filter is available as an optional accessory. The dust filter fits perfectly between the front panel and the front fans. PCIE CABLE For vertical GPU mounting, only an additional riser cable is required. With a PCB that has a hole spacing of 112.7mm, the Lian-Li PCIe 4.0 X16 RISER CABLE is compatible with the LANCOOL 216.

Galahad AIO UNI FAN SL Edition 240/360 An outstanding All-In-One CPU cooler now features UNI FAN SL 120. Available in two size and two color, 240mm and 360mm, black and white. Supplies with ARGB high static pressure fan with a variable speed of 800 to 1900 RPM and have a rated airflow of 58.54 CFM. Mounting with a finish look and accommodate with a 5 years warranty .

This Lian Li Liquid Cooler are providing good speed goes up to 3200RPM, 45-degree tubing connector that enables 360-degree rotation of tubes. It comes with white color design. Supported by L connect 3 for lighting effects of water block, motor speed, and Features: 3 interchangeable pump looks that can be customized with L-Connect 3 Factory installed with ARGB daisy-chainable radiator fans Pump motor speed goes up to 3200RPM Includes a newly designed copper plate and creates straightened Liquid coolant pathway 45-degree tubing connector with tubes’ inner diameter increased to 7mm

Lian Li Galahad II Trinity offers 240mm CPU Liquid cooler which users can get it with black color design and ARGB Lighting included. Pump motor speed goes up to 3200 RPM. It comes with pre-installed fans. Features: 3 interchangeable pump looks that can be customized with L-Connect 3 Factory installed with ARGB daisy-chainable radiator fans Pump motor speed goes up to 3200RPM Includes a newly designed copper plate and creates straightened Liquid coolant pathway 45-degree tubing connector with tubes’ inner diameter increased to 7mm

Features: Control lighting effects with L-Connect 3 for personalizing light effects. Compatible with Strimer Plus and Strimer Plus V2. Available for motherboard 24-pin, GPU dual 8-pin, and GPU triple 8 pin. CONTROL STRIMER PLUS IN ONE GO The controller that is included in STRIMER PLUS V2 24-PIN can be connected to an 8-PIN or Triple 8-PIN, offering full control of both cables via L-Connect 3. L-CONNECT 3 SOFTWARE TO CONTROL STRIMER PLUS V2 Full control and preview the lighting effect of the STRIMER PLUS V2 with the L-Connect 3 interface. Individual Channel Lighting Effects With 24-pin at 6 channels, the Dual 8-pin at 4 channels, and the triple 8-pin at 6 channels, plenty of personalized light effects can be accomplished by L-Connect 3. CONTROL STRIMER PLUS IN ONE GO The controller that is included in STRIMER PLUS V2 24-PIN can be connected to an 8-PIN or Triple 8-PIN, offering full control of both cables via L-Connect 3.

Features: Available as a motherboard 24-pin The design of Strimer Plus V2 is thinner and more flexible than ever, and the braided cables are replaced with high-end silicon-covered cables. Each Strimer features individually controllable light channels for even more possible light effects. With the 24-pin at 6 channels, the Dual 8-pin at 4 channels, and the triple 8-pin at 6 channels.

Features: Highly customizable addressable RGB extension cables. Available for GPU dual 8-pin Create a unique PC look with outstanding quality and material Compatible with L-Connect 3 for personalizing light effects

Features: This models to fit 40 series Graphics cards. 12+4 Pin to 12+4 pin • 12 light guides • Support ATX 3.0

Features: Available as a GPU triple 8 pin The design of Strimer Plus V2 is thinner and more flexible than ever, and the braided cables are replaced with high-end silicon-covered cables. Control Strimer Plus V2 by the included controller or L-Connect 3. each Strimer features individually controllable light channels for even more possible light effects. With the 24-pin at 6 channels, the Dual 8-pin at 4 channels, and the triple 8-pin at 6 channels, multiple, highly customizable light effects can be combined within the same cable via L-Connect 3. each Strimer features individually controllable light channels for even more possible light effects.