Addressable RGB for Full Colour Control The P12 PWM PST A-RGB has 12 digital A-RGB LEDs in the center fan wheel. These can be controlled independently of each other and are compatible with the common A-RGB standards of leading motherboard manufacturers. The fan can thus be fully illuminated directly the A-RGB mainboard connector or via an external controller and synchronised with the illumination of other hardware. ARCTIC's partner SignalRGB offers a comprehensive solution for synchronisation and individual configuration of the illumination.

Future-Proof Compatibility The Freezer 36 A-RGB is multi-compatible with Intel and AMD sockets. Intel will release the new Arrow Lake processors on the LGA1851 socket in the future. We guarantee full compatibility. All Freezer 36 can be used with the new LGA1851 socket from Intel without limitation. *Extend the compatibility with LGA1200, LGA1156, LGA1155, LGA1151 and LGA1150 sockets using the LGA1200/115X Mounting Kit.

Integrated VRM Fan PWM-controlled fan lowers the voltage regulator temperature, ensuring stable performance. Offset Mounting | Intel & AMD Offset Mounting for Intel and AMD Shifts the cold plate to the CPU hotspot for more efficient heat transfer. Contact Frame | Intel Intel Contact Frame Optimized contact pressure distribution for longer CPU lifespan and improved heat dissipation. The New P12 Pro Fans More Performance at Any Speed The P12 Pro unleashes its full potential: quieter and more powerful at low speeds, with greater performance reserves under load—for maximum cooling without compromise. 600—3000 rpm Speed Fluid Dynamic Bearing Bearing 6.9 mmH2O Static Pressure 77 cfm | 131 m³/h Premium-Class Radiator The 38 mm radiator not only enhances heat dissipation but also holds more liquid than conventional 27 mm radiators. This reduces heat buildup and ensures more efficient handling of temperature spikes.

Limited Compatibility with Certain Motherboards Some motherboards may be incompatible with the Liquid Freezer III Pro due to oversized SSD coolers in the M.2_1 slot. For affected motherboards, we provide a compatible M.2 cooler free of charge. Premium Tubing Reinforced EPDM tubing with braided sheathing for increased durability Easy Installation Easy Installation Pre-installed, pre-wired fans, straightforward mounting, and an animated online manual. MX-6 Inside Includes MX-6 Thermal Paste Simply apply in a cross pattern—the water pump’s cold plate distributes the paste evenly Two Control Options With the splitter cable, the pump, VRM fan, and radiator fans can be controlled separately or synchronized via a single PWM signal with the all-in-one cable.

ntegrated Cable Management Fan cables integrated into the sleeving simplify installation and minimize cable clutter. The New P14 Pro Fans More Performance at Any Speed The P14 Pro unleashes its full potential: quieter and more powerful at low speeds, with greater performance reserves under load—for maximum cooling without compromise. 400—2500 rpm Speed Fluid Dynamic Bearing Bearing 5.2 mmH2O Static Pressure 110 cfm | 186 m³/h Airflow Premium-Class Radiator The 38 mm radiator not only enhances heat dissipation but also holds more liquid than conventional 27 mm radiators. This reduces heat buildup and ensures more efficient handling of temperature spikes.

Efficient Performance at High Air Resistance Thanks to high static pressure, the Pro fans move air effectively through tight spaces. This makes them ideal for radiators, perforated panels, and mesh filters. Maximum Performance, Redefined Revised fan blade design for an optimal balance of performance and smooth operation. P12 Pro | Black A-RGB | Explosion View Optimized Bearing-Shaft Design (FDB) A hydrodynamic bearing combined with an extended shaft ensures quieter operation by improving pressure distribution and minimizing vibrations. Automated Balancing An automated measuring and balancing process ensures exceptional precision and smooth performance by applying the balancing compound with pinpoint accuracy.

Efficient Performance at High Air Resistance Thanks to high static pressure, the Pro fans move air effectively through tight spaces. This makes them ideal for radiators, perforated panels, and mesh filters. Maximum Performance, Redefined Revised fan blade design for an optimal balance of performance and smooth operation. Automated Balancing An automated measuring and balancing process ensures exceptional precision and smooth performance by applying the balancing compound with pinpoint accuracy. SOTA Microcontroller Reduces motor noise, compensates for load fluctuations, and protects against inrush currents and reverse polarity More Power – Less Noise The fan delivers more performance at low speeds with higher airflow and static pressure at just 25 dB(A) – ideal for quiet, powerful cooling. Minimum Gap Dimensions for Maximum Efficiency Enables higher static pressure and maximum airflow efficiency.

Efficient Performance at High Air Resistance Thanks to high static pressure, the Pro fans move air effectively through tight spaces. This makes them ideal for radiators, perforated panels, and mesh filters. Maximum Performance, Redefined Revised fan blade design for an optimal balance of performance and smooth operation. P12 Pro | Black | Explosion View Optimized Bearing-Shaft Design (FDB) A hydrodynamic bearing combined with an extended shaft ensures quieter operation by improving pressure distribution and minimizing vibrations. Automated Balancing An automated measuring and balancing process ensures exceptional precision and smooth performance by applying the balancing compound with pinpoint accuracy.

Quality You Can Rely On To ensure the longevity of our products, we carry out long-term tests under different, sometimes very adverse conditions. In this way, we learn how we can permanently improve our products for our customers. In addition, the excellent results of long-term testing give us the assurance that our products are not only outstanding in terms of quality, but also in terms of durability. This is a certainty that we are happy to pass on to our customers, which is why we give a 6-year manufacturer's guarantee. Large Selection of Variants The Freezer 36 is available in five different versions, all equipped with two fans in a push-pull configuration. In addition to the standard model with aluminium heatsink design, a version with a black heatsink is also available. For continuous operation, there is also the CO version, which is equipped with fans with double ball bearings. Alternatively, users can choose between a black and a white version with A-RGB fans. Optimised Heatsink The fins of the heatsink are open at the side and allow the pull fan to draw additional cool air out of the pc case through the heatsink. This side-flow design achieves even more efficient ventilation. Designed for Continuous Operation Both fans of the Freezer 36 CO are each equipped with two japanese ball bearings. This makes these fans particularly durable and resistant to external forces such as heat, dust and vibrations. This variant is therefore the ideal choice for 24/7 operation. LGA1851 | LGA1700 Contact Frame Intel's Independent Loading Mechanism (ILM) deforms the CPU by pressing it into the socket at two points with over 40 kg. This causes pressure in the PCB, the DIE and the solder layer between the DIE and IHS (Integrated Heat Spreader). With high thermal load, this can lead to long-term problems. The mounting frame from ARCTIC does not deform the CPU, reduces the mechanical load on the CPU massively, is quick and easy to install and allows the cooler to be screwed onto the CPU's backplate. As a result, mechanical stress on the mainboard and CPU is minimised, cooling performance remains consistent and installation is quick and uncomplicated.

High-Class Finish with Aluminium Top Plate With its push-pull configuration, the Freezer 36 A-RGB not only impresses with its efficient cooling performance, but also with its design. The soldered ends of the heatpipes are concealed by the screwed aluminium cover, allowing it to blend seamlessly into any PC setup and highlight both performance and appearance. Improved Fan Mounting Thanks to the innovative mounting system, booth fans are effortlessly mounted in the heatsink using a click system. This mounting method eliminates the need for fan clips, making it easier to install the cooler or replace the fans, even if the cooler is already installed. The Freezer 36 A-RGB is therefore compatible with most 120 mm fans. LGA1851 | LGA1700 Contact Frame Intel's Independent Loading Mechanism (ILM) deforms the CPU by pressing it into the socket at two points with over 40 kg. This causes pressure in the PCB, the DIE and the solder layer between the DIE and IHS (Integrated Heat Spreader). With high thermal load, this can lead to long-term problems. The mounting frame from ARCTIC does not deform the CPU, reduces the mechanical load on the CPU massively, is quick and easy to install and allows the cooler to be screwed onto the CPU's backplate. As a result, mechanical stress on the mainboard and CPU is minimised, cooling performance remains consistent and installation is quick and uncomplicated. Freezer_36_ARGB_White_Fluid-Dynamic-Bearing_White_EN High-Quality Bearing Thanks to a combination of alloy and lubricant developed in Germany, friction within the bearing is minimised and greater efficiency is achieved. In addition to preventing lubricant loss, wear on the pin and sleeve is also minimised. In this way, less heat is generated, less bearing noise is produced and the service life of the fan is significantly extended.

Liquid Freezer III Pro 360 Multi Compatible All-in-One CPU Water Cooler Integrated VRM Fan PWM-controlled fan lowers the voltage regulator temperature, ensuring stable performance. Offset Mounting for Intel and AMD Shifts the cold plate to the CPU hotspot for more efficient heat transfer. Intel Contact Frame Optimized contact pressure distribution for longer CPU lifespan and improved heat dissipation.

High-Class Finish with Aluminium Top Plate With its push-pull configuration, the Freezer 36 not only impresses with its efficient cooling performance, but also with its design. The soldered ends of the heatpipes are concealed by the screwed aluminium cover, allowing it to blend seamlessly into any PC setup and highlight both performance and appearance. Freezer_36_Series_Intel_LGA1700_Tested-and-Confirmed Freezer 36 – Tested and Confirmed by Intel Intel has tested and confirmed the Freezer 36 on the i9-13900K/KF, i9-14900K/KF and i9-13900KS in the Enthusiast and Desktop category. In these tests, Intel considered both the mounting with contact frame and the cooler's performance. Intel® Product Compatibility Tool Freezer_36_Serie_AMD_Intel Future-Proof Compatibility The Freezer 36 is multi-compatible with Intel and AMD sockets. Intel will release the new Arrow Lake processors on the LGA1851 socket in the future. We guarantee full compatibility. All Freezer 36 can be used with the new LGA1851 socket from Intel without limitation. Freezer_36_Black_Fan-Montage Improved Fan Mounting Thanks to the innovative mounting system, booth fans are effortlessly mounted in the heatsink using a click system. This mounting method eliminates the need for fan clips, making it easier to install the cooler or replace the fans, even if the cooler is already installed. The Freezer 36 is therefore compatible with most 120 mm fans. Freezer_36_Serie_Contact_Frame LGA1851 | LGA1700 Contact Frame Intel's Independent Loading Mechanism (ILM) deforms the CPU by pressing it into the socket at two points with over 40 kg. This causes pressure in the PCB, the DIE and the solder layer between the DIE and IHS (Integrated Heat Spreader). With high thermal load, this can lead to long-term problems. The mounting frame from ARCTIC does not deform the CPU, reduces the mechanical load on the CPU massively, is quick and easy to install and allows the cooler to be screwed onto the CPU's backplate. As a result, mechanical stress on the mainboard and CPU is minimised, cooling performance remains consistent and installation is quick and uncomplicated. Freezer_36_Fluid-Dynamic-Bearing_Black_EN High-Quality Bearing Thanks to a combination of alloy and lubricant developed in Germany, friction within the bearing is minimised and greater efficiency is achieved. In addition to preventing lubricant loss, wear on the pin and sleeve is also minimised. In this way, less heat is generated, less bearing noise is produced and the service life of the fan is significantly extended. Freezer_36_Black_Heatsink-Airflow Optimised Heatsink The fins of the heatsink are open at the side and allow the pull fan to draw additional cool air out of the pc case through the heatsink. This side-flow design achieves even more efficient ventilation. Freezer_36_Black_P-Fan P-Fans with High Static Pressure ARCTIC relies on the proven P fans, which are known for their powerful performance. The P series is particularly suitable for use on heat sinks and radiators. Due to the dense fin structure of heat sinks, the fans used achieve significantly better performance than fans designed for airflow thanks to their high static pressure. Freezer_36_Serie_Variants_unbeleuchtet Large Selection of Variants The Freezer 36 is available in five different versions, all equipped with two fans in a push-pull configuration. In addition to the standard model with aluminium heatsink design, a version with a black heatsink is also available. For continuous operation, there is also the CO version, which is equipped with fans with double ball bearings. Alternatively, users can choose between a black and a white version with A-RGB fans.